Mohammad Taghi Ahmadian

CURRICULUM VITA

M..T..AHMADIAN

PROFESSOR

SCHOOL OF MECHANIICAL ENGIINEERIING

SHARIIF UNIIVERSIITY OF TECHNOLOGY

AZADII ST..,, TEHRAN,, IIRAN

TEL.. ((+9821)) 66165503 ,, FAX.. 66000021

E_MAIIL:: [email protected]

EDUCATION:

Ph.D. MECHANICAL ENGINEERING, UNIVERSITY OF KANSAS, LAWRENCE, KS 66044 USA, 1986.

Ph.D. SPACE & Plasma PHYSICS, UNIVERSITY OF KANSAS, LAWRENCE, KS 66044 USA, 1980

PROFESSIONAL EXPERIENCE:

 1984-1985

 Assistant Professor, University of Missouri at Spring Field.

 Teachiing Courrses:

Applliicattiion off Miicrro Prrocessorrs iin Engiineerriing,, Logiic Desiign.

 1985-1988

 Assistant Professor, Department of Mechanical Engineering, University of Kansas at Lawrence.

 Teaching Courses:

Application of Micro Processors in Mechanical Engineering, Control, Strength of Material.

 1989-Present

 School of Mechanical Engineering, Sharif University of Technology, Tehran, Iran.

 Teaching Courses:

Strength of Material, Vibration, Dynamics, Advanced Vibration, Non Linear Vibration, Finite Element Methods, Advanced Finite Element Method.

RESEARCH INTREST:

 Soft tissue engineering specialy performance of heart, brain , liver and kidney.

 Biomems and cell deformation.

 Health Related Topics such as Design of Medical Devices, Kids Innovation Instrumentation

INDUSTRIAL EXPERIENCE:

 Design of large nad suspended heat exchangers

 Vibration- isolation of mechanical systems

PUBLICATIONS:

 Conferences :

1- Ali A. Abbasi, Ali Alizadeh, M.T. Ahmadian S. Tarighi, “ Application Of Hyperelastic Models In Mechanical Properties Prediction Of Mouse Oocyte And Embryo Cells At Large Deformations”, Proceedings Of The Asme 2016 International Mechanical Engineering Congress & Exposition Imece2016 November 11-17, 2016, Phoenix, Arizona, Usa

2- Hesam Hoursan, Mohammad Taghi Ahmadian, “Effects of Kurtosis Value on the response of vibrating beam with different boundary conditions”, Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016 , Phoenix, Arizona, USA-November 11-17, 2016, Phoenix, Arizona, USA

3- Abbas Shafiee, Mohammad Taghi Ahmadian, Maryam Hoviattalab, “ Trumatic Brain Injury Cuased by Gz Accelration”, Proceedings of the ASME 2016 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2016, August 21-24, 2016, Charlotte, North Carolina

4- Abbas Shafiee, Mohammad Taghi Ahmadian, Maryam Hoviattalab, “MECHANICAL CHARACTERIZATION OF BRAIN TISSUE IN COMPRESSION”, Proceedings of the ASME 2016 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2016, August 21-24, 2016, Charlotte, North Carolina

5- Hesam Hoursan, Mohammad Taghi Ahmadian, “ Dynamic behaviour of Ox tibial and femoral bones: A Comparison with human bones”, Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, BOSTON, MASSACHUSETTS, USA, August 2-5, 2015

6- Ali Fallah, Mohammad Taghi Ahmadian, Keikhosrow Firoozbakhsh," Micromechanical Modeling of Connective Soft Tissues", Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, BOSTON, MASSACHUSETTS, USA, August 2-5, 2015

7- Ali Fallah, Mohammad Taghi Ahmadian, Ahmad Barari, "Nonlinear Free Vibration of

Piezoelectric Functionally Graded Beams in Thermal Environment", Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, BOSTON, MASSACHUSETTS, USA, August 2-5, 2015

8- M.H.Kahrobaiyan, I.Vardi, M.T.Ahmadian, S.Henein, “ INVESTIGATING THE SIZE-DEPENDENT STATIC AND DYNAMIC BEHAVIOR OF CIRCULAR MICRO-PLATES SUBJECTED TO CAPILLARY FORCE”, Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, BOSTON, MASSACHUSETTS, USA, August 2-5, 2015

9- H. Hoursan, M.T.Ahmadian, “DRAFT:Dynamic behaviour of Oxtibial and femoral bones :A Comparison with human bones”, Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, BOSTON, MASSACHUSETTS, USA, August 2-5, 2015

10- R. Derakhshan, M. T. Ahmadian, K. Firoozbakhsh, " Application of Homotopy Analysis Method in Dynamic Analysis of a Microbeam",2nd National Industrial Mathematics Conference, Tabriz-Iran, 27 May - 2015

11- Abbas Shafiee, Mohammad Taghi Ahmadian, Maryam Hoviattalab, " Mechanical Characterization of Brain Tissue in Compression", Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition IMECE2015, Houston, Texas, USA, November 13-19, 2015

12- Mohammad Damshenas, Mohammad Taghi Ahmadian, Ahmad Barari, " Vibration Analysis of Coupled Axial and Transverse Vibrations of Oil Well Drill Strings without Effect of Drilling Mud", Proceedings of the 25th CANCAM, London, Ontario, Canada, May 31 – June 4, 2015

13- Mohammad Damshenas, Mohammad Taghi Ahmadian, Ahmad Barari, " Vibration Analysis of Coupled Axial and Transverse Vibrations of Oil Well Drill Strings without Effect of Drilling Mud", Proceedings of the 25th CANCAM, London, Ontario, Canada, May 31 – June 4, 2015

14- R. Derakhshan, M. T. Ahmadian, K. Firoozbakhs, " Comparison of FEM and HAM Techniques in the Microbeam Actuation under Nonlinear External Force", The 23rd Annual International Conference on Mechanical Engineering-ISME 2015, Mech. Eng. Dept., Amirkabir University of Technology, Tehran, Iran, 12-14 May, 2015

15- Reza Derakhshan, M.T.Ahmadian, " Application of Homotopy Analysis Method in Nonlinear Dynamic Analysis of a Microbeam under the Effect of Electric Filed", 4th International Conference on Acostics and Vibration ISAV 2014,Iran University of Science & Technology, Tehran- Iran, 10-11 Dec 2014

16- Shafiee A.,Hoursan H., Ahmadian M.T. and Hoviattalab M., “Two dimensional modelling andanalysis of the effect of linear acceleration on brain strain field intraumatic brain injury”, 22st Annual InternationalConference on Mechanical Engineering-ISME2014, 22-24 April, 2014, School ofMechanical Eng., Shahid Chamran University, Ahvaz, Iran (in Persian)

17- Mahdi Mojahedi, Keikhosrow Firoozbakhsh, Ahmad Barari and Mohammad Taghi Ahmadian, " Static and Dynamic Analysis of a Clamp-Clamp Nano-Beam Under Electrostatic Actuation and Detection Considering Intermolecular Forces", proceeding of the ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013

18- M. T. Ahmadian, Sh. Ghorbani, K. Firoozbakhsh and A. Barari, "Vibration and Dynamic Analysis of Oil Well Drillstring Considering Coupled Axial and Torsional Effects Using Cylindrical Superelement" .proceeding of the ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013

19- Masoud Molaei Najafabadi, Mohammad Ali Ehteram, Mohammad Taghi Ahmadian and Ahmad Barari," System and Method for Analysis of Involving Factors in the Demisting Cyclone Efficiency", ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013

20- Hesam Hoursan, Mohammad Taghi Ahmadian, Ahmad Barari and Hamid Naghibi Beidokhti," Modelling and Analysis of the Effect of Angular Velocity and Acceleration on Brain Strain Field in Traumatic Brain Injury", ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013

21- Mahdi Mojahedi, Mohammad Taghi Ahmadian, Keikhosrow Firoozbakhsh and Ahmad Barari," Oscillatory Behavior of the Nonlinear Clamped-Free Beam Microgyroscopes Under Electrostatic Actuation and Detection" ASME 2013 International Mechanical Engineering Congress and Exposition, San Diego, California, USA, November 15–21, 2013

22- Mohammad Taghi Ahmadian, Mahdi Mojahedi, Ahmad Barari and Keikhosrow Firoozbakhsh," Characterization of Static Behavior of a Nonlinear Doubly Clamped Microbeam Under Electrostatic Actuation and Detection", ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA, August 4–7, 2013

23- Mahdi Mojahedi, Keikhosrow Firoozbakhsh and Mohammad Taghi Ahmadian," The Oscillatory Behavior of Doubly Clamped Microgyroscopes Under Electrostatic Actuation and Detection",ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Portland, Oregon, USA, August 4–7, 2013

24- Hamid Moeenfard, Farzaneh Kaji, Mohammad Taghi Ahmadian, “COUPLED BENDING AND TORSION EFFECTS ON THE SQUEEZED FILM AIR DAMPING IN TORSIONAL MICROMIRRORS”, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012 August 12-15, 2012

25- Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian, “A Coupled Two Degree of Freedom Model for Nano/Micromirrors under van der Waals Force”, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012 August 12-15, 2012

26- S.A. Tajalli, M.H. Kahrobaiyan, M. Rahaeifard, M. T. Ahmadian, M. R. Movahhedy,J. Akbari, ” MECHANICAL BEHAVIOR ANALYSIS OF MICRO-SCALED FUNCTIONALLY GRADED TIMOSHENKO BEAMS BY THE STRAIN GRADIENT THEORY”, Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012 August 12-15, 2012

27- Ali A. Abbasi, M.T.AHMADIAN, “FORCE CONTROLLED MANIPULATION OF BIOLOGICAL CELLS USING A MONOLITHIC MEMS BASED NANO-MICRO GRIPPER”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

28- Ali A. Abbasi, M.T.AHMADIAN, ” PREDICTION OF REACTION FORCE ON EXTERNAL INDENTER IN CELL INJECTION EXPERIMENT USING SUPPORT VECTOR MACHINE TECHNIQUE” , Proceedings of the ASME 2012 International

Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

29- Saeed Mostaani, Dara Singh, K. Firouzbakhsh, M.T. Ahmadian, “ Optimization of a passive vehicle suspension system for ride comfort enhancement with different speeds based on DOE method” , Proc. of Int. Colloquiums on Computer Electronics Electrical Mechanical and Civil, New Delhi, 2011

30- Dara Singh, K. Firouzbakhsh, M.T. Ahmadian, “Effect of the human eye cornea material property on measurement of the intraocular eye pressure utilizing Goldmann applantation tonometer” , Int. Colloquiums on Computer Electronics Electrical Mechanical and Civil, New Delhi, 2011

31- Ali A. Abbasi, M.T.AHMADIAN, ”WHOLE CELL MECHANICAL PROPERTY CHARACTERIZATION BASED ON MECHANICAL PROPERTIES OF ITS CYTOPLASM AND BIO MEMBRANE” , Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

32- Ali A. Abbasi, M.T.AHMADIAN, ”UTILIZATION OF LEAST SQUARE SUPPORT VECTOR MACHINE (LSSVM) FOR ELECTRICAL RESISTIVITY PREDICTION OF THE ZN-MN-S NANOCRYSTALLINE SEMICONDUCTOR FILMS”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

33- Reza Moheimani, M.T. Ahmadian, “ON FREE VIBRATION OF FUNCTIONALLY GRADED EULER-BERNOULLI BEAM MODELS BASED ON THE NON-LOCAL THEORY”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

34- E.Taati, M. Nikfar, M.T. Ahmadian, “Formulation for static behavior of the viscoelastic Euler-Bernoulli micro-beam based on the modified couple stress theory”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

35- M. T. Ahmadian, A. Gobal, R. Alkhani, “Estimation of Modulus of Elasticity for Closed-cell Aluminum Foam”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

36- Ali Darvishian, Hamid Moeenfard, Mohammad Taghi Ahmadian, “STATIC PULL-IN ANALYSIS OF MICRO-CONTILEVERS IN WET ECHTING

FABRICATION PROCESS”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

37- Ali Darvishian, Hamid Moeenfard, Mohammad Taghi Ahmadian, “IFLUECE OF FRINGING FIELD EFFECT OF THE PULL-IN OF SIZE DEPEDET MICRO-BEAMS”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

38- Ali Darvishian, Hamid Moeenfard, Nasser Ghaderi Mohammad Taghi Ahmadian, “CHARACTERIZATION OF STATIC BEHAVIOR OF ELECTROSTATICALLY ACTUATED MICRO TWEEZERS USING MODIFIED COUPLE STRESS THEORY”, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

39- Ali Karimzade, Hamid Moeenfard, Mohammad Taghi Ahmadian, “NONLINEAR ANALYSIS OF PULL-IN VOLTAGE FOR A FULLY CLAMPED MICROPLATE WITH MOVABLE BASE” , Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

40- Ali Karimzade, Mohammad Taghi Ahmadian, Hamidreza Asemani, “NONLINEAR ANALYSIS OF PULL-IN PHENOMENON AND MAXIMUM DEFLECTION OF MEMS WITH MOVABLE BASE UNDER CAPILLARY AND VAN DER WAALS FORCES” , Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012 November 9-15, 2012

41- Saeed Mostaani, Dara Singh, Keykhosrow Firouzbakhsh, Mohammad Taghi Ahmadian, "Optimization of a passive vehicle suspension system for ride comfort enhancement with different speeds based on DOE method", Proc. of Int. Colloquiums on Computer Electronics Electrical Mechanical and Civil, New Dehli, 2011.

42- Dara Singh, Keykhosrow Firouzbakhsh, Mohammad Taghi Ahmadian, " Effect of the human eye cornea material property on measurement of the intraocular eye pressure utilizing Goldmann applantation tonometer", Proc. of Int. Colloquiums on Computer Electronics Electrical Mechanical and Civil, New Dehli, January 2011.

43- K. Firoozbakhsh, M. Hasanian, M. T. Ahmadian. "SIMULATION OF RED BLOOD CELL PASSING THROUGH CONSTRICTIONS USING MODIFIED MOVING PARTICLE SEMI-IMPLICIT METHOD" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

44- K. Firoozbakhsh, M. Hasanian, M. T. Ahmadian, S. Samiezadeh. "SIMULATION OF RED BLOOD CELL DEFORMATION IN MICROVESSELS USING A NEW RAPID MODIFIED PARTICLE METHOD" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

45- M. H. Kahrobaiyan, M. Khajehpour, M. T. Ahmadian. "A SIZE-DEPENDENT BEAM ELEMENT BASED ON THE MODIFIED COUPLE STRESS THEORY " , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado,USA.

46- M. Nabian, M. T. Ahmadian. " Multi-Objective Optimization of Functionally Graded Hollow Cylinders " , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

47- H. Mazaheri, A. Hosseinzadeh, M. T. Ahmadian, A. Barari. " ANALYTICAL APPROACH TO VIBRATION ANALYSIS OF A PENDULUM WRAPPING ON A CYLINDER" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

48- Hashem Mazaheri, Ali Hosseinzadeh, Mohammad T. Ahmadian, Ahmad Barari. " Nonlinear Vibration Analysis of a Micro Beam Exposed to an External Flow" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

49- Mohammad-Taghi Ahmadian, Mohammad-Hosein Kargarnovin, Ramazan-Ali Jafari-Talookolaei. " DYNAMIC ANALYSIS OF A DELAMINATED COMPOSITE BEAM DUE TO A MOVING OSCILLATORY MASS" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

50- M. Hadipour, M. T. Ahmadian, S. G. Lashkari, A. Barari. " Natural Frequency Improvement of a Suspended FGM Bridge" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

51- Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian. " CLOSED FORM SOLUTIONS FOR THE STATICAL BEHAVIOR OF MICROMIRRORS UNDER CAPILLARY FORCES" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

52- Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian. " ANALYTICAL SOLUTIONS FOR THE STATIC INSTABILITY OF MICRO/NANO MIRRORS UNDER THE COMBINED EFFECT OF CAPILLARY FORCE AND CASIMIR FORCE" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

53- Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian, Hasan Zohoor. " CLOSED FORM SOLUTIONS FOR THE PROBLEM OF STATICAL BEHAVIOR OF NANO/MICROMIRRORS UNDER THE EFFECT OF CAPILLARY FORCE AND VAN DER WAALS FORCE" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

54- E. Khosravani, M. H. Kahrobaiyan, M. T. Ahmadian. " RESONANT FREQUENCY AND SENSITIVITY OF AN AFM MICROCANTILEVER MODELED BY THE NON-LOCAL THEORY" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

55- M. H. Kahrobaiyan, M. T. Ahmadian, K. Firoozbakhsh, A. Fallah, S. Bozorgzadeh. " On the Static Pull-In of Circular Microplates Under Capillary Force" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

56- Hamid Moeenfard, Ali Darvishian, Mohammad T. Ahmadian. " COUPLING EFFECTS BETWEEN TORSION AND BENDING IN TORSIONAL MICROMIRRORS UNDER CAPILLARY FORCES" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

57- Hamid Moeenfard, Ali Darvishian, Mohammad Taghi Ahmadian. "A Coupled Model Between Torsion And Bending In Nano/Micromirrors Under The Combined Effect Of Van Der Waals Force And Capillary Force" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

58- Hamid Moeenfard, Mohammad T. Ahmadian, Hosein Moeenfard. " CLOSED FORM SOLUTIONS FOR ELECTROSTATICALLY ACTUATED MICROMIRRORS CONSIDERING THE BENDING EFFECT" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

59- Masoud Nasiri Sarvi, M. T. Ahmadian, Ahmad Barari. " Deformation and Stress Analysis of the Fullerene by Super Element" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

60- Masoud Nasiri Sarvi, M. T. Ahmadian. " COMPARISON OF DEFORMATION ANALYSIS OF A BIOLOGICAL CELL UNDER AN INJECTION FORCE USING ANALYTICAL, EXPERIMENTAL AND FINITE ELEMENT METHODS AND ARTIFICIAL NEURAL NETWORK" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

61- Mohammad Taghi Ahmadian, Golsa Ghanati, Keikhosrow Firoozbakhsh, Parsa Ghanati. " The Nonlinear Finite Element Analysis of a Novel Dental Implant with an Interposed Internal Layer imitating periodontal ligament’s function" , Proceedings of the ASME 2011 International Mechanical Engineering Congress & Exposition IMECE2011, November 11-17, 2011, Denver, Colorado, USA.

62- Ali A. Abbasi, G. R. Vossoughi, M. T. Ahmadian. "DEFORMATION PREDICTION OF MOUSE EMBRYOS IN CELL INJECTION EXPERIMENT BY A FEEDFORWARD ARTIFICIAL NEURAL NETWORK" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

63- Hamid Faghani, M. T. Ahmadian. "Design A New Spherical Super element to Static and Modal Analysis of spherical " , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

64- R. Saljooghi, M. T. Ahmadian. "FREE VIBRATION ANALYSIS OF FGM BEAMS WITH DIFFERENT BOUNDARY CONDITIONS USING RKPM MESHLESS METHOD" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 29-31, 2011, Washington, DC, USA.

65- Hamed Moradi, Mohammad R. Movahhedy, Gholamreza Vossoughi, Mohammad T. Ahmadian. "Investigation of the Internal Resonance and Regenerative Chatter Dynamics in Nonlinear Milling Process" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

66- Y. Alizadeh Vaghasloo, Abdolreza Pasharavesh, M. T. Ahmadian, Ali Fallah. "STATIC ANALYSIS OF ELECTRICALLY ACTUATED NANO TO MICRON SCALE BEAMS USING NONLOCAL THEORY" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

67- M. T. Ahmadian, Abdolreza Pasharavesh, Ali Fallah. "APPLICATION OF NONLOCAL THEORY IN DYNAMIC PULL-IN ANALYSIS OF ELECTROSTATICALLY ACTUATED MICRO AND NANO BEAMS”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

68- Hamid Moeenfard, Mohammad Taghi Ahmadian, Anoushiravan Farshidianfar. "ANALYTICAL MODELING OF SQUEEZE FILM DAMPING IN MICROMIRRORS" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011,Washington DC, USA.

69- Masoud Nasiri Sarvi, M. T. Ahmadian. "APPLICATION OF A NEW SPHERICAL SUPER ELEMENT IN PREDICTING THE DEFORMATION OF BIOLOGICAL CELLS IN MICROINJECTION”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011,Washington DC, USA.

70- Masoud Nasiri Sarvi, M. T. Ahmadian. “DEFORMATION, STRESS AND NATURAL FREQUENCY ANALYSIS OF THE FULLERENE BY FINITE SUPER ELEMENT METHOD" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

71- Mohamad Shafiee Motahar, Mohammad Taghi Ahmadian. “VIBRATIONAL ANALYSIS OF WAVY CARBON NANOTUBE-REINFORCED COMPOSITES”, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

72- Abdolreza Pasharavesh, Y. Alizadeh Vaghasloo, M. T. Ahmadian, Reza Moheimani.

" NONLINEAR VIBRATION ANALYSIS OF NANO TO MICRON SCALE BEAMS UNDER ELECTRIC FORCE USING NONLOCAL THEORY" , Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2011, August 28-31, 2011, Washington, DC, USA.

73- M.T. AHMADIAN, G.R. VOSSOUGHI, A.A. ABBASI, P.RAEISSI. “MODELING OF CELL DEFORMATION UNDER EXTERNAL FORCE USING ARTIFICIAL NEURAL NETWORK”, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

74- M.T. AHMADIAN, K. FIROOZBAKHSH, M. HASANIAN. “SIMULATION OF RED BLOOD CELL MECHANICAL BEHAVIOR IN OPTICAL TWEEZERS EXPERIMENT BASED ON A PARTICLE METHOD” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

75- M.H. Kahrobaiyan, M.T. Ahmadian, P. Haghighi, A. Haghighi. “AN INVESTIGATION ON THE FLEXURAL SENSITIVITY AND RESONANT FREQUENCY OF AN AFM WITH SIDEWALL AND TOP-SURFACE PROBES” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

76- Abdolreza Pasharavesh, Y. Alizadeh Vaghasloo, M.T. Ahmadian, Reza Moheimani. “VIBRATION OF A MICROBEAM UNDER ULTRA-SHORT-PULSED LASER EXCITATION CONSIDERING MOMENTUM AND HEATING EFFECT” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

77- Abdolreza Pasharavesh, M.T. Ahmadian, Y. Alizadeh Vaghasloo, A. Assempour. “EFFECT OF MICROBEAM ELECTRICAL RESISTIVITY ON DYNAMIC PULL-IN VOLTAGE OF AN ELECTROSTATICALLY ACTUATED MICROBEAM” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

78- M.T. Ahmadian, Masoud Nasiri Sarvi, Amir Ashkan Nasiripour. “DEFLECTION AND VIBRATION ANALYSIS OF A SPHERICAL STRUCTURE USING A NEWLY DESIGNED SPHERICAL SUPER ELEMENT” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

79- Mahdi Mojahedi, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “Investigation of the oscillatory behavior of electrostatically-actuated microbeams” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

80- Mahdi Mojahedi, Hamid Moeenfard, Mohammad Taghi Ahmadian. “Nonlinear Vibration and Buckling Analysis of Beams Using Homotopy perturbation Method” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada.

81- Farid Tajaddodianfar, Mohammad Taghi Ahmadian, Gholamreza Vossoughi. “ROBUST STABLE CONTROL OF HAPTIC DEVICES BASED ON TRANSPARENCY MAXIMIZATION” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

82- H. Moeenfard, M. H. Kahrobaiyan, M. T. Ahmadian. “APPLICATION OF THE EXTENDED KANTOROVICH METHOD TO THE STATIC DEFLECTION OF MICROPLATES UNDER CAPILLARY FORCE” , Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition IMECE2010, November 12-18, 2010, Vancouver, British Columbia, Canada

83- Abdolreza Pasharavesh, Y. Alizadeh Vaghasloo, A. Fallah, M.T. Ahmadian. “CONTROL OF VIBRATION AMPLITUDE, FREQUENCY AND DAMPING OF AN ELECTROSTATICALLY ACTUATED MICROBEAM USING CAPACITIVE, INDUCTIVE AND RESISTIVE ELEMENTS” , Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

84- A. Hosseinzadeh, M.T. Ahmadian. “Application of Piezoelectric and Functionally Graded Materials in Designing Electrostatically Actuated Micro Switches” , Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

85- Abdolreza Pasharavesh, M.T. Ahmadian, Y. Alizadeh Vaghasloo. “EFFECT OF MICROBEAM ELECTRICAL RESISTIVITY ON VIBRATION FREQUENCY SHIFT OF AN ELECTROSTATICALLY ACTUATED MICROBEAM” , Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

86- M.T. Ahmadian, M.H. Kahrobaiyan, P. Haghighi, A. Yousefi. “TORSIONAL SENSITIVITY AND RESONANT FREQUENCY OF AN AFM WITH PARALLEL SIDEWALL PROBES” , Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

87- M.H. Kahrobaiyan, M.T. Ahmadian, P. Haghighi, A. haghighi. “AN INVESTIGATION ON THE TORSIONAL SENSITIVITY AND RESONANT FREQUENCY OF AN AFM WITH SIDEWALL AND TOP-SURFACE PROBES” , Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

88- Hamid Moeenfard, Mohammad Taghi Ahmadian, Ali Soroush, Aria Alasty. “BEYOND PULL-IN STABILIZATION OF DUAL AXIS MICROMIRRORS USING FUZZY CONTROLLERS” , Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE2010, August 15-18, 2010, Montreal, Quebec, Canada

89- M.M. Rezaei, M.R. Movahhedy, M.T. Ahmadian, H. Moradi. “Development of Inverse Receptance Coupling Method for Prediction of Milling Dynamics” , Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, July 12-14, 2010, Istanbul, Turkey

90- M. Rahaeifard, M.H. Kahrobaiyan, S.A. Moeini, M.T. Ahmadian, M. Hoviattalab. “FLEXURAL SENSITIVITY OF A V-SHAPED AFM CANTILEVER MADE OF FUNCTIONALLY GRADED MATERIALS” , Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, July 12-14, 2010, Istanbul, Turkey

91- S.A. Moeini, M. Rahaeifard, M.T. Ahmadian, M. Movahhedy. “FREE VIBRATION ANALYSIS OF FUNCTIONALLY GRADED CYLINDRICAL SHELLS STIFFENED BY UNIFORMLY AND NON-UNIFORMLY DISTRIBUTED RING STIFFENERS”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

92- MOHAMMAD MOTAMEDI, MOHAMMAD TAGHI AHMADIAN, GHOLAM REZA VOSSOUGHI, FARID TAJADDODIANFAR. “CONTROL DESIGN AND PASSIVITY ANALYSIS FOR SCALED ONE-DIMENSIONAL BILATERAL TELEOPERATED NANOMANIPULATION”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

93- Mahdi Mojahedi, Hamid Moeenfard, Mohammad Taghi Ahmadian. “ Analytical Solutions for the Static Instability of Nano-switches under the Effect of Casimir Force and Electrostatic Actuation”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

94- Mahdi Mojahedi, Hamid Moeenfard, Mohammad Taghi Ahmadian, “Investigation of Casimir and Van der Waals Forces for a Nonlinear Double-Clamped Beam Using Homotopy Perturbation Method”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

95- S.A.Moeini, M.H.Kahrobaiyan, M.Rahaeifard, M.T.Ahmadian. “OPTIMIZATION OF FIRST MODE SENSITIVITY OF V-SHAPED AFM CANTILEVER USING GENETIC ALGORITHM METHOD”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

96- Mahdi Behzad, Hamid Moeenfard, Mohammad Taghi Ahmadian. “APPLICATION OF THE EXTENDED KANTOROVICH METHOD TO THE VIBRATIONAL ANALYSIS OF ELECTRICALLY ACTUATED MICROPLATES”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

97- M. Moghimi Zand, M.T. Ahmadian, B. Rashidian. “Dynamic pull-in instability of initially curved microbeams”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

98- F. Tajaddodianfar, M.T. Ahmadian, G.R. Vossoughi, M. Motamedi. “TRANSPARENCY ENHANCEMENT OF HAPTIC SYSTEMS BASED ON COMPENSATION OF DEVICE DYNAMICS”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

99- M. Rahaeifard, S.A. Moeini, M.H. Kahrobaiyan, M.T. Ahmadian. “Vibration Analysis Of A Rotating Fgm Cantilever Arm”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

100- M. Moghimi Zand, B. Rashidian, M.T. Ahmadian. “Contact Time Study of Microsystems Actuated by Ramp-Input Voltages”, Proceedings of the ASME 2009 International Mechanical Engineering Congress & Exposition IMECE2009, November 13-19, Lake Buena Vista, Florida, USA

101- Mahdi Mojahedi, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “ON THE PRIMARY RESONANCE OF AN ELECTROSTATICALLY ACTUATED MEMS USING THE HOMOTOPY PERTURBATION METHOD”, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA

102- Saeed Hashemnia, Mohammad T. Ahmadian. “ Different Optimization Criteria for Vehicle Seat Suspension Control: Position versus Acceleration”, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA

103- Hamed Moradi, Mohammad T. Ahmadian, Firooz Bakhtiari Nejad. “Nonlinear Oscillation And Stability Analysis Of The Turning Process With A Worn Tool”, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA

104- M.T. Ahmadian, M.H. Kahrobaiyan, M. Rahaeifard. “SENSITIVITY ANALYSIS OF ATOMIC FORCE MICROSCOPE CANTILEVER MADE OF FUNCTIONALLY GRADED MATERIALS”, DETC2009-86254, August 30 – September 2, 2009, San Diego, CA, USA

105- M.H. Kahrobaiyan, M. Rahaeifard, M.T. Ahmadian. “TORSIONAL SENSITIVITY OF THE FIRST FOUR MODES OF AN AFM CANTILEVER WITH A SIDEWALL PROBE USING ANALYTICAL METHOD”, Proceedings of the 3rd International Conference on Micro- and Nanosystems MNS3 , DETC2009-87035, August 30 – September 2, 2009, San Diego, CA, USA

106- S. ahmad tajalli, M.T. ahmadian, mostafa pirmoradian. “Dynamic pull-in analysis of Circular and Rectangular microplates under the squeeze-film damping effect”, 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

107- Mohammad Taghi Ahmadian, Hamid Moeenfard, Tohid Pirbodaghi. “Static Deflection of Electrically Actuated Microplates, an Extended Kantorovich Approach”, 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

108- Mohammad Taghi Ahmadian, Hamid Moeenfard, Tohid Pirbodaghi. “APPLICATION OF THE EXTENDED KANTOROVICH METHOD TO THE STATIC DEFLECTION OF ELECTRICALLY ACTUATED MICROPLATES”, Proceedings of IMECE2008 2008 ASME International Mechanical Engineering Congress and Exposition October 31-November 6, 2008, Boston, Massachusetts, USA

109- S. Ahmad Tajalli, Mahdi Moghimi Zand, Mohammad Taghi Ahmadian. “Dynamic Analysis of Electrically Actuated Rectangular Microplates with Nonlinear Plate Theory under Squeeze-Film Damping Effect”, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, Massachusetts, USA

110- Mahdi Moghimi Zand, S. Ahmad Tajalli, Mohammad Taghi Ahmadian. “Studying Dynamic Pull-in Behavior of Microbeams by means of the Homotopy Analysis Method”, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, Massachusetts, USA

111- M.T. Ahmadian, A. Taghvaeipour, M. Bonakdar. “APPLICATION OF A NEW CYLINDRICAL ELEMENT FORMULATION IN FINITE ELEMENT STRUCTURAL ANALYSIS OF FGM HOLLOW CYLINDERS”, Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, Massachusetts, USA

112- Elyas Ghafoori, Mohammad Taghi Ahmadian. “Dynamic Response of a Two-dimensional Stationary Framework Subjected to a Moving Carriage Hoisting a Swinging Object Using Finite Element Method”, CSME-SCGM 2008, Canada

113- Elyas Ghafoori, Mohammad Taghi Ahmadian. “Calculating the Dynamic Response of a Multi-spans Bridge Subjected to a Moving Vehicle Considering Acceleration and Deceleration”, CSME-SCGM 2008, Canada

114- M.T. Ahmadian, R.A. Jafari-Talookolaei, E. Esmailzadeh. “Multi-Span Laminated Composite Beam Traversed by Moving Non-rigid Masses”, American Institute of Aeronautics and Astronautics (AIAA)2008

115- A. Sakhaee-Pour, M.T. Ahmadian, A. Vafai. “ Finite element technique to mimic vibrational behavior of single-walled carbon nanotubes”, computer Design (CDES'07), las vegas, June 2007

116- M.T. Ahmadian, A. Asempour, A. Mobini “Load distribution identification of plates using neural networks”, CANCAM 2007, Toronto. Apr 2007

117- M.T. Ahmadian, M. Paak, T. Pirbodaghi, S. Hassanpour. “VIBRATION ANALYSIS OF A COMPOSITE TIMOSHENKO BEAM WITH ACTUATING LAYERS UNDER MOTION OF A UNIFORMLLY TRAVELING PARTIALLY DISRIBUTED MASS”, Proceedings of IMECE2007, 2007ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA

118- M.T. Ahmadian, M. Paak. “Design and analysis of a novel peristaltic micropump”, 15th Annual Conference on Mechanical Engineering (ISME), May 2007, Tehran, Iran

119- A. Sakhaee-Pour, M.T. Ahmadian, A. Vafai. “NANOSCALE VIBRATIONAL BEHAVIOR OF SINGLE-LAYERED GRAPHENE SHEETS”, Proceedings of IMECE, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA

120- M.T. Ahmadian, T. Pirbodaghi, M. Pak. “NATURAL FREQUENCIES OF STIFFENED AND UNSTIFFENED LAMINATED COMPOSITE PLATES”, Proceedings of IMECE2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington, USA

121- M.T. Ahmadian, M. Bonakdar, T. Pirbodaghi. “Spin softening effect in rotating hollow cylinders using a newly designed cylindrical superelement”, 21th Canadian congress of applied mechanics (CANCAM), toronto, june2007

122- M.T. Ahmadian, T. Pirbodaghi, M. Fesanghari. “Dynamic Response of Rectangular Cross-Ply Laminated Composite Plates under Moving Mass”, 21th Canadian congress of applied mechanics (CANCAM)'', toronto, june2007

123- M.T. Ahmadian, T. Pirbodaghi, M. Bonakdar. “Free Vibration Analysis of Cross-Ply Laminated Composite Plates Subjected to Axial Load on Elastic Foundation”, 21th Canadian congress of applied mechanics (CANCAM)'', toronto, june2007

124- M.T. Ahmadian, A. Tajali, M. Pirmoradian. “Analysis of thermoelastic damping effect on rectangular microplates vibration”, 21ht Canadian congress of applied mechanics (CANCAM)'', toronto, june 2007

125- M.T. Ahmadian, M. Paak. “Design and application of peristaltic micropumps for drug delivery”, 26th Annual Canadian biomaterials society mee, ontario (2007)

126- M. Bonakdar, M.T.Ahmadian, M. Moghimi Zand. “Calculation of geometric matrix for a newly designed cylindrical superelement”, 21th Canadian congress of applied mechanics (CANCAM), toronto, june 2007

127- M.T. Ahmadian, M. Moghimi Zand, M. Bonakdar. “Vibrational Analysis of Multi Layer Microplates Considering Nonlinear Squeeze Film Damping and Electrostatic Actuation”, 2nd Asia-Pacific Int. Conf. on Comp. Meth. in Engrg (ICOME 2006), Nov. 14-16, 2006, Hefei, China

128- M.T. Ahmadian, M. Bonakdar, M. Moghimi Zand. “Application of a newly designed super element to modal analysis of hollow cylinders”, Las Vegas, Nevada, June 2006

129- M.T. Ahmadian, M. Moghimi Zand, M.M. Nasr Azadani. “Vibration Analysis of Timoshenko Beam Carrying Non Uniform Partially Distributed Moving Mass Using Mode Summation Method”, 14th Annual (International) Mechanical Engineering Conference – May 2006 , Isfahan University of Technology, Isfahan, Iran

130- M.T. Ahmadian, M. Moghimi Zand, M. Bonakdar. “Vibrational Analysis of Multi Layer Microplates Considering Nonlinear Squeeze Film Damping and Electrostatic Actuation”, COMPUTATIONAL METHODS IN ENGINEERING, 2nd Asia-Pacific Int. Conf. on Comp. Meth. in Engrg (ICOME 2006), Nov. 14-16, 2006, Hefei, China

131- M.T. Ahmadian, Hoseinali Borhan, M. Moghimi Zand. “DYNAMIC FINITE ELEMENT MODELING OF ELECTROSTATICAL ACTUATED MICRO STRUCTURES CONSIDERING SQUEEZE FILM DAMPING EFFECT”, Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA

132- M.T. Ahmadian, M. Moghimi Zand, M. Bonakdar. “Pull-in Analysis and Transient Behavior of Multi layer Microplates under the Actuation of Nonlinear Electrostatic Force”, Symposium on mechanics of slender structures, University of Northampton, England

133- M.T. Ahmadian, A. Mobini. “Online Prediction of Plate Deformation Under External Forces Using Neural Networks”, ASME International Mechanical Engineering Congress and Exposition, IMECE06, Chicago, Illinois, Nov 2006

134- M.T. Ahmadian, T. Pirbodaghi. “DYNAMIC ANALYSIS OF Orthotropic LAMINATED COMPOSITE PLATES UNDER AXIAL LOAD ON ELASTIC FOUNDATION”, ASME International Mechanical Engineering Congress and Exposition, IMECE06, Chicago, Illinois, Nov 2006

135- M.T. Ahmadian, M. Bonakdar, M. Moghimi Zand. “Application of a newly designed cylindrical superelement to vibration analysis of laminated hollow cylinders”, Symposium on mechanics of slender structures'', University of Northampton, England, September 2006

136- H. A. Borhan, M.T. Ahmadian, M.R. Movahedi. “Dynamic Finite Element Modelling of Coupled Domain MEMS Devices with Electrostatic And Squeeze File Effects”, Third AUS international Syposium on Mechatronics AUS-ISM06, AUS, Sharjah, U.A.E. , 18-20 April 2006

137- Amin Mehrabian, M.T. Ahmadian. “EFFECT OF ACTUATION FREQUENCY ON THE PERFORMANCE OF DIFFUSER MICROPUMPS”, Proceedings of ASME ICNMM2006, 4th International Conference on Nanochannels, Microchannels and Minichannels, June 19-21, 2006, Limerick, Ireland

138- M.T. Ahmadian, Amin Mehrabian. “A New Model for Dynamic Analysis of Side Mounted Diffuser Valve Micropumps”, Proceedings of ESDA2006, 8th Biennial ASME Conference on Engineering Systems Design and Analysis, July 4-7, 2006, Torino, Italy

139- M.T. AHMADIAN, M. MOGHIMI ZAND, H. BORHAN. “DYNAMICS OF MULTI LAYER MICROPLATES CONSIDERING NONLINEAR”, Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA

140- M.T. AHMADIAN, R.A. Jafari-Talookolaei. “A new approach in finite element modeling of generally laminated composite eams”, Proceedings of IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, Illinois, USA

141- M. T. Ahmadian, M. H. Saidi, Amin Mehrabian, M. Bazargan, S. D. Kenarsari. “Performance of Valveless Diffuser Micropumps under Harmonic Piezoelectric Actuation”, Proceedings of ESDA2006, 8th Biennial ASME Conference on Engineering Systems Design and Analysis, July 4-7, 2006, Torino, Italy

142- Mohammad H. Saghafi, Mohammad T. Ahmadian, Hadi Salehi, R. Monazami, Azad Q. Zade. “Propose and characteristics study of a new actuation method for micropumps, using membrane buckling”, Proceeding of NANO2005 - Integrated nano systems: Design, Synthesis & Application, 15-16 September 2005, Berkeley, California, USA

143- Mohammad Taghi Ahmadian, Amin Mehrabian. “Design optimization by numerical characterization of fluid flow through the valveless diffuser type micropumps”, IMEMS Conference 2006, Sangapour (2005)

144- R. Sharifi Sedeh, M.T. Ahmadian, A. Elahi, R. Saeidpour Azar. “APPLICATION OF DIFFERENT CONTROL APPROACHES TO THE DESIGN OF SEMI-ACTIVE SUSPENSION SYSTEMS”, 13th Annual (International) Mechanical Engineering Conference – May 2005, Isfahan University of Technology, Isfahan, Iran

145- M.M. Halili, A. Delnavaz, M.T. Ahmadian. “Dynamic Modeling of Moving Load on a Rail Track Wait a Visco-Elastic Foundation Using Finite Element Method”, 13th Annual (International) Mechanical Engineering Conference – May 2005, Isfahan University of Technology, Isfahan, Iran

146- M.T. Ahmadian. “Dynamic Strategy Formulation in Aviation Industry”, Air Transport Industries Management in IRAN, 19-20 Jan 2005 

147- M.T. Ahmadian, R. Sharifi Sedeh, R. Abdolah pour. “Analysis of Brain Deformation Under Blood Vessel Rupture Using Finite Element Method”, Universal Conference Management Systems & Support, San Diego - Las Vegas, June 2005

148- M.T. Ahmadian, R. Sharifi Sedeh, R. Abdolah pour. “Car Semi – Active Suspension System in Reduction of Harmful Effect of Road Excitation on Human Health”, Universal Conference Management Systems & Support, San Diego - Las Vegas, June 2005

149- M.T. Ahmadian, R. Sharifi Sedeh, R. Abdolah pour, Kazemi. “Adaptive Fuzzy Controller Using Gain-Scaling Method for Autopilot Ship Steering with Nonlinear System”, 13th Annual (International) Mechanical Engineering Conference – Isfehan, Iran 2005

150- M.T. Ahmadian, M.S. Zangeneh, S.R. Ghoreishi. “Nonlinear Forced Vibration Analysis of Rectangular Plate Using Elements”, XXI International congress of Theoretical and Applied Mechanics, Warsaw, Poland, August 15-21, 2004

151- M. Sharafaty Zangeneh, M.T. Ahmadian, Seyed Reza Ghoreishi. “Using Super Element and P-Approximation for Free Vibration analysis of Composite Plate”, ASME International Mechanical Engineering Congress, November 13-19, 2004, California

152- M.T. Ahmadian, M. Moghimi Zand. “Compensating frequency response of the sensors in blind separation of sources'', IST2001, Azar 1380, Tehran, Iran

153- M.M. Rezaei, M.R. Movahhedy, M.T. Ahmadian. “Dynamic contact modeling of spindle- holder interface in milling”, 17th annual international conference on mechanical engineering, May 19-21, University of Tehran, 1388

154- Mohammad Taghi Ahmadian, Hamid Moeenfard, Tohid Pirbodaghi. “Static Deflection of Electrically Actuated Microplates, an Extended Kantorovich Approach”, 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

155- S.ahmad tajalli, mostafa pirmoradian, Mohammad Taghi Ahmadian. “Dynamic pull-in analysis of Circular and Rectangular microplates under the squeeze-film damping effect'', 16th. Annual (International) Conference on Mechanical Engineering-ISME2008, May 14-16, 2008, Shahid Bahonar University of Kerman, Iran

156- M.T. Ahmadian, R. Sharifi Sedeh, R. Abdollahpour. “Development of Hyper-Viscoelastic Modeling for Tumor Growth in the Liver Using Genetic Algorithm and

Finite Element Method'', Universal Conference Management Systems & Support, San Diego - Las Vegas

 Journal Publications :

1. Samaneh Haddadi, Mohammad Taghi Ahmadian, “Analysis of nonlinear acoustic wave propagation in HIFU treatment using Westervelt equation”, Journal of Scientia Iranica (in press)

2. Alireza Fatan, M.T. Ahmadian., “Vibration analysis of FGM rings using a newly designed cylindrical superelement”, Journal of Scientia Iranica (in press)

3. R. Derakhshan, M.T. Ahmadian, K. Firoozbakhsh, “Pull-in criteria of a nonclassical microbeam under electric field using homotopy method”, Journal of Scientia Iranica (in press)

4. Ali A. Abbasi, M.T. Ahmadian , Ali Alizadeh, “Application of Hyperelastic Models in Mechanical Properties prediction of Mouse Oocyte and Embryo Cells at Large Deformations”, Journal of Scientia Iranica (in press)

5. Samaneh Haddadi, PhD , Mohammad Taghi Ahmadian, PhD, “Numerical and ExperimentalEvaluation of High-Intensity Focused Ultrasound– InducedLesions in Liver TissueExVivo”, J Ultrasound Med. (2017) Nov 30

6. A. Karimzadeh, M.T. Ahmadianb, M. Rahaeifard, “Effect of size dependency on in-plane vibration of circular micro-rings”, Journal of Scientia Iranica B (2017) 24(4)

7. Ali Fallah, Mohammad Taghi Ahmadian, Mohammad Mohammadi Aghdam, “Rate-dependent behavior of connective tissue through a micromechanics-based hyper viscoelastic model,” International Journal of Engineering Science 121 (2017) 91–107

8. A. Taraghi Osguei, M.T. Ahmadian, M. Asghari, N.M. Pugno, “Free vibration analysis of cylindrical panels with spiral cross section,” International Journal of Mechanical Sciences 133 (2017) 376–386

9. Pasharavesh, A., Ahmadian, M.T. & Zohoor, H, “On the energy extraction from large amplitude vibrations of MEMS-based piezoelectric harvesters”, Journal of Acta Mechanica (2017) doi:10.1007/s00707-017-1864-x 

10. A Karimzadeh, MT Ahmadian, K Firoozbakhsh, M Rahaeifard, “Vibrational Analysis of Size-Dependent Rotating Micro-Rings”, International Journal of Structural Stability and Dynamics Vol. 17, No. 9 (2017) 1771012 (11 pages)

11. Mohamad T. Ahmadian, Hamed Jafarishad, “Design and analysis of a 3-link micro-manipulator actuated by piezoelectric layers”, Journal of Mechanism and Machine Theory 112 (2017) 43–60

12. Mostafa M. Kashani, Mohammad R. Movahhedy, Mohammad T. Ahmadian, Reza Shoja Razavi, “In-process determination of laser beam absorption coefficient for laser-assisted turning processes”, Int J Adv Manuf Technol (2017) DOI 10.1007/s00170-017-0326-x

13. Mostafa M. Kashani, Mohammad R. Movahhedy, Mohammad T. Ahmadian, Reza Shoja Razavi, “Analytical Solution of Transient Three-Dimensional Temperature Field in a Rotating Cylinder Subject to a Localized Laser Beam”, Journal of Heat Transfer JUNE (2017), Vol. 139 / 062701-1

14. Amin Taraghi Osguei, Mohamad Taghi Ahmadian, Mohsen Asghari and Nicola Maria Pugno, “A Shell Model for Free Vibration Analysis of Carbon Nanoscroll”, Journal of Materials (2017), 10(4), 387.

15. A. Fallah, M.T.Ahmadian, K. Firozbakhsha, M.M. Aghdam, “Micromechanical modeling of rate-dependent behavior of Connective tissues”, Journal of Theoretical Biology (2017) Volume 416, 119–128.

16. Abdolreza Pasharavesh, M.T. Ahmadian, “Characterization of a nonlinear MEMS-based piezoelectric resonator for wideband micro power generation”, Applied Mathematical Modelling (2017). Volume 41, 121–142.

17. Abdolreza Pasharavesh, M.T. Ahmadian, H. Zohoor, “Coupled electromechanical analysis of MEMS‑based energy harvesters integrated with nonlinear power extraction circuits”, Microsyst Technol (2016). DOI 10.1007/s00542-016-3024-y

18. Abdolreza Pasharavesh. M. T. Ahmadian. H. Zohoor, “Electromechanical modeling and analytical investigation of nonlinearities in energy harvesting piezoelectric beams”, Int J Mech Mater Des DOI 10.1007/s10999-016-9353-2

19. A.N. Sarvestani, A.Shamloo, M.T. Ahmadian," Modeling Paramecium swimming in a capillary tube", Scientia Iranica B (2016) 23(2), 658-667

20. Ali N. Sarvestani, Amir Shamloo, Mohammad Taghi Ahmadian, “Simulation of Paramecium Chemotaxis Exposed to Calcium Gradients”, Cell Biochem Biophys. 2016 Jun; 74(2):241-52

21. A.Fallah ,M.T.Ahmadiana, K.Firozbakhsha, M.M.Aghdamc, “Micromechanics and constitutive modeling of connective soft tissues”, JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, (2016) 157 – 176

22. R. Pourhamid, M.T. Ahmadian, H. Mahdavy Moghaddam, A.R. Mohammadzadeh, "Mechanical analysis of a functionally graded cylinder-piston under internal pressure due to a combustion engine using a cylindrical super element and considering thermal loading", Scientia Iranica B (2015) 22(2), 493-503

23. B. Zahiri1, M.T. Ahmadian," Fine-tuned double-deck Stewart platform using base excitation with a 6DOF piezo driven hexapod", (2015)

24. M. Daeichi, M.T. Ahmadian," Application of Variational Iteration Method to large vibration analysis of slenderness beams considering mid-plane stretching", Scientia Iranica,(2015) Volume 22 - Number 5

25. M. Rahaeifard, M.T. Ahmadian, "On pull-in instabilities of microcantilevers", International Journal of Engineering Science, Vol 87 (2015), pp 23-31.

26. M. Rahaeifard , M.T. Ahmadian, K. Firoozbakhsh," Vibration analysis of electrostatically actuated nonlinearmicrobridges based on the modified couple stress theory", Journal of Applied Mathematical Modelling,(2014)

27. M. Rahaeifard, M.T. Ahmadian, K. Firoozbakhsh," A strain gradient based yield criterion",International Journal of Engineering Science, 77 (2014) 45–54

28. M.H. Kahrobaiyan, M. Asghari, M.T. Ahmadian, " A Timoshenko beam element based on the modified couple stress theory", International Journal of Mechanical Sciences, Volume 79, ( 2014), pp 75–83

29. M.H.Kahrobaiyan, M.Asghari, M.T.Ahmadian. "A strain gradient Timoshenko beam element: application to MEMS". Acta Mechanica, Volume 226, (2014), pp 505-525

30. M. T. Ahmadian, R. Alkhani, A. Gobal."Development of empirical equations for prediction of modulus of elasticity for monodisperse metallic foams", Scientia Iranica, Volume 21 - Number 6 (2014),pp 1955-1961

31. R. Saljooghi , M. T. Ahmadian, G. H. Farrahi,"Vibration and buckling analysis of functionally graded beams using reproducing kernel particle method", Scientia Iranica, Volume 21 - Number 6 (2014),pp 1896-1906

32.. M. Rahaeifard, M.T. Ahmadian, K. Firoozbakhsh, “Size-dependent dynamic behavior of microcantilevers under suddenly applied DC voltage”, Journal of Mechanical Engineering Science, in print, 2013.

33. M.T.Ahmadian, M.H. Kahrobaiyan, M.Asghari. “Strain gradient beam element”, Finite Elementsin Analysis and Design, 68(2013)63–75.

34. M. T. Ahmadian, A.R. Mortazavi Moghaddam, M. Sarkeshi, A. Kheradpisheh. “Deformation Modeling of an FGM Plate under External Force” , Advanced Materials Research Vols. 622-623 (2013) pp 246-253

35. M. Mojahedi, M.T. Ahmadian, K. Forouzbakhsh, “OSCILLATORY BEHAVIOR OF AN ELECTROSTATICALLY ACTUATED MICROCANTILEVER GYROSCOPE”, INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS, 2013

36. H. Moradi, GH.R. Vosoughi, M.R. Movahedi, M.T. Ahmadian, “Forced vibration analysis of the milling process with structural nonlinearity, internal resonance, tool wear and process damping effects” , INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 2013

37. M. Mojahedi, M.T. Ahamadian, K. Firouzbakhsh, “Static deflection and pull-in instability analysis of an electrostatically actuated mirocantilever” , Journal of Mechanical Science and Technology, 2013

38. M. Rahaeifard, M.H. Kahrobaiyan, M.T. Ahamadian, K. Firouzbakhsh, “Strain gradient formulation of functionally graded nonlinear” , INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, 2013

39.. M.H.Kahrobayian, M. Asghari, M.T. Ahmadian, “Longitudinal behavior of strain gradient bars” , International Journal of Engineering Science - Iranian journal, 2013

40. H. Moeenfard, A. Darvishian, M.T. Ahmadian, “A coupled bending-torsion model for electrostatically actuated torsional nano/micro-actuators with considering influence of van der Waals force”, ACTA MECHANICA, 2013

41. H. Moeenfard, A. Darvishian, M.T. Ahmadian, “ANALYTICAL MODELING OF THE EFFECTS OF ELECTROSTATIC ACTUATION AND CASIMIR FORCE ON THE PULL-IN INSTABILITY AND STATIC BEHAVIOR OF TORSIONAL NANO/MICRO ACTUATORS” , INTERNATIONAL JOURNAL OF MODERN PHYSICS B , 2013

42.. MMS Fakhrabadi, PK Khorasani, A Rastgoo, MT Ahmadian , “Molecular dynamics simulation of pull-in phenomena in carbon nanotubes with Stone–Wales defects”, Solid State Communications 157, 38-44, 2013

43. R.A. Jafari-Talookolaei ،M.H. Kargarnovin, M.T. Ahmadian “Vibration analysis of delaminated Timoshenko beams under the motion of a constant amplitude point force traveling with uniform velocity” , INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2013

44. A. Tajalli, M. Rahaeifard, M. H. Kahrobaiyan, M.R. Movahedi, Javad Akbari, M.T. Ahmadian, “Mechanical behavior analysis of size-dependent micro-scaled functionally graded 3 Timoshenko beams by strain gradient elasticity theory” , COMPOSITE STRUCTURES, 2013

45. M. Kahrobaiyan, M. Asghari, M. T. Ahmadian, Strain gradient beam element, Finite Elements in Analysis and Design, In press, 2012

46. Mostafa Hassanian, M.T. Ahmadian, k.Firouzbakhsh, “Simulation of Red Blood Cell motion in Microvessels Using Modified Moving Particle Semi-Implicit Method”, Scientia Iranica, Vol.1 ,No.19,2012

47. Kahrobaeyan, Rahayifard, Tajalli, M.T. Ahmadian, “A strain gradient functionally graded Euler–Bernoulli beam formulation”, INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE, No.52.2012

48. M.H. Kargarnovin, M.T.Ahmadian, R. Jafari-Talookolaei, “ Dynamics of a Delaminated Timoshenko Beam Subjected to